|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 污水污物 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
切割潛水排污泵
“ KAYSEN是工業行業的可靠解決方案合作伙伴，并且是化學液處理的組件和系統的制造商?；谖覀兊膭?chuàng)新產品，服務和針對特定行業的解決方案，我們?yōu)槿蚩蛻籼峁┝烁叩男屎桶踩浴！?/strong>
"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
切割潛水排污泵——上?？偞?/strong>
我們的目標
為客戶提高效率和安全性
我們在全球的市場水處理和化學流體處理
我們的報價
組件，系統，服務和行業特定的解決方案
我們的價值
可靠性
革新
解決方案驅動
全球
Imported pneumatic diaphragm pump——Shanghai distributor
Our goal
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Our offer
Components, systems, services and industry-specific solutions
Our value
reliability
innovation
Solution driven
global
KAYSEN凱森進口潛水深井泵概述：
1、潛水深井泵為離心式或混流式；采用水潤滑軸承；與電機的聯接采用聯軸器剛性聯接。深井泵葉輪在電機帶動下旋轉產生離心力，使液體能量增加經泵殼的導流作用進行提水。在水泵上端設有逆止閥體，防止電泵停機時，因揚水管中倒流的水損壞工作部件。閥上有泄水孔，可將管路中的水緩緩放掉，防止冬天凍裂管路。 (注：低揚程潛水泵不設逆止閥體)
2、潛水深井泵的電機為密閉充水濕式結構。電機定子繞組采用耐水的聚乙烯絕緣，尼龍護套多層結構的電磁線。導軸承及推力軸承均采用水潤滑材質。電機內部充滿清水，用以冷卻電機和潤滑軸承。電機底部裝有調壓膜，用以調整由電機溫升引起的機體內清水的脹縮壓差。電機的上端軸上裝有防砂機構，用來阻止水中泥砂進入機體內部。
3、潛水深井泵的管路部分：用以聯接電泵使其吊裝在機井中，將水輸送到地面上去。主要由短輸水管、輸水管、彎管、夾板等部件組成。短輸出管是輸水管路與電泵的連接過渡部件。彎管安裝在井口處，以改變水流的傳送方向。夾板是在深井泵的安裝過程中吊裝和固定輸出管路。
主要優點：
●具有結構簡單
●機組效率高
●噪音小
●運行安全可靠
●安裝維修方便的優點
主要應用：
具有結構簡單，機組效率高，噪音小，運行安全可靠，安裝維修方便的優點。它適用于從深水井，熱水井及海洋提取，也可用于河流、水庫、水渠等提取；
主要用于農田灌溉及高原山區的人畜用水，亦可供城市、工廠、鐵路、礦山、工地供排水使用。
主要特點：
●結構簡單，節省原材料。
●電機、水泵—體，潛入水中運行，安全可靠。
●對井管無特殊要求，對輸水管只要能承受相應壓力即可。
●安裝使用維護方便簡單，占地面積小，不需建造泵房。
技術參數：
●尺寸：6英寸—12英寸
●流量：5—600立方/小時
●揚程：6—600米
●功率：3—250千瓦
●電源：電壓380V+5%，頻率50Hz+1%赫茲，三相交流電。
●生產標準：NEMA標準。
Germany Kaysen imported submersible deep well pump overview:
1. The submersible deep well pump is centrifugal or mixed flow; it uses water-lubricated bearings; the connection to the motor uses a rigid coupling. The impeller of the deep well pump is driven by the motor to generate centrifugal force, which increases the energy of the liquid and conducts water extraction through the diversion effect of the pump casing. A check valve body is provided on the upper end of the water pump to prevent the working parts from being damaged by the backflow water in the water pipe when the electric pump is stopped. The valve has a drain hole, which can slowly drain the water in the pipeline to prevent the pipeline from freezing and cracking in winter. (Note: The low-lift submersible pump does not have a check valve body)
2. The motor of the submersible deep well pump is a closed water-filled wet structure. The stator winding of the motor adopts water-resistant polyethylene insulation and nylon sheathed multi-layer electromagnetic wires. Both guide bearing and thrust bearing are made of water lubricated material. The motor is filled with clean water to cool the motor and lubricate the bearings. The bottom of the motor is equipped with a pressure regulating film to adjust the expansion and contraction pressure difference of the clean water in the body caused by the temperature rise of the motor. The upper shaft of the motor is equipped with a sand control mechanism to prevent mud and sand from entering the body.
3. The pipeline part of the submersible deep well pump: it is used to connect the electric pump so that it is hoisted in the machine well and transports the water to the ground. It is mainly composed of short water pipe, water pipe, elbow, splint and other components. The short output pipe is the transitional part of the connection between the water pipeline and the electric pump. The elbow is installed at the wellhead to change the direction of water flow. The splint is used to hoist and fix the output pipeline during the installation of the deep well pump.
main advantage:
●Simple structure
●High unit efficiency
●Low noise
●Safe and reliable operation
●The advantages of convenient installation and maintenance
main application:
It has the advantages of simple structure, high efficiency of the unit, low noise, safe and reliable operation, and convenient installation and maintenance. It is suitable for extraction from deep water wells, hot water wells and oceans, and can also be used to extract rivers, reservoirs, water channels, etc.;
It is mainly used for farmland irrigation and human and animal water in plateau mountains, and can also be used for water supply and drainage in cities, factories, railways, mines, and construction sites.
main feature:
●Simple structure, saving raw materials.
●Motor and water pump body, submerged in water, safe and reliable.
●There are no special requirements for the well pipe, as long as the water pipe can bear the corresponding pressure.
●Easy to install and use and maintain, small footprint, no need to build pump room.
technical parameter:
●Size: 6 inches-12 inches
●Flow rate: 5—600 cubic meters/hour
●Lift: 6-600 meters
●Power: 3—250kw
●Power supply: voltage 380V+5%, frequency 50Hz+1% Hz, three-phase alternating current.
●Production standard: NEMA standard.
關于Kaysen
我們的基礎
KAYSEN全球成功故事的基礎是數十年來的工程專業知識，對應用的深刻理解和不斷創新的高質量產品。因此，該公司集團不斷投資于研發。KAYSEN在全球12個生產基地中也具有高度的垂直整合，從而確保為客戶提供*的質量水平，并確保我們不受供應商市場波動的影響。
我們的宗旨
集成在精心設計的解決方案中的模塊化KAYSEN系列，使我們各行各業的客戶可以隨時隨地在其生產過程中實現*的安全性和效率。
對我們而言，與客戶的親近意味著與客戶一起尋找適合個人需求的正確解決方案。個人，實用的建議和流暢的項目處理與我們全球客戶服務一樣，都是我們提供的服務的一部分。
我們的承諾
我們熱情地致力于為每個客戶選擇合適的泵，可持續且具有成本效益的解決方案。
在90多個國家/地區，我們自己的銷售，生產和服務公司的大約3,500名員工每天都在努力為每種產品提供快速可靠的服務。由于KAYSEN泵業作為全球市場*的地位，意味著對*產品和服務的持續承諾以及對負責任的思維和行動的義務。
Our foundation
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
Our aim
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
Our promise
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.
