|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 水、化工、食品、顏料等 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 氣動 |
| 適用介質 | 水 |
| 是否進口 |
進口塑料氣動隔膜泵 上海代理商
“ KAYSEN是工業行業的可靠解決方案合作伙伴，并且是化學液處理的組件和系統的制造商。基于我們的創新產品，服務和針對特定行業的解決方案，我們?yōu)?客戶提供了更高的效率和安全性?！?/strong>
"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
進口塑料氣動隔膜泵 上海代理商
我們的目標
為客戶提高效率和安全性
我們在 的市場水處理和化學流體處理
我們的報價
組件，系統，服務和行業特定的解決方案
我們的價值
可靠性
革新
解決方案驅動
Imported pneumatic diaphragm pump——Shanghai distributor
Our goal
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Our offer
Components, systems, services and industry-specific solutions
Our value
reliability
innovation
Solution driven
global
德國KAYSEN凱森進口塑料氣動隔膜泵概述
進口氣動隔膜泵是一種新型輸送機械，是目前業內比較新穎的一種泵類。采用壓縮空氣為動力源，對于各種腐蝕性液體，帶顆粒的液體，高粘度、易揮發、易燃、劇毒的液體，均能予以抽光吸盡。目前已形成系列化生產，共有八種規格直徑：φ10mm（3/8''）、φ15mm（1/2''）、φ25mm（1''）、φ40mm（11/2''）、φ50mm（2''）、φ65mm（21/2''）、φ80mm（3''）、φ100mm（4''）。四種材質：鋁合金、鑄鐵、不銹鋼、工程塑料。隔膜泵根據不同液體介質分別采用丁晴橡膠、氯丁橡膠、氟橡膠、聚四氟乙烯隔膜。以滿足不同用戶的需要。
主要特點：
●該泵無旋轉部件，不會造成環境污染和危害人身安全。
●不必用電，在易燃、易爆場所使用安全可靠。
●可輸送較粘的液體。（粘度在1萬厘泊以下）
●本泵無須用油潤滑，即使空轉，對泵也無任何影響，這是該泵一大特點。
●氣動隔膜泵既能抽送流動的液體，又能輸送一些不易流動的介質，具有自吸泵、潛水泵、屏蔽泵、泥漿泵和雜質泵等輸送機械的許多優點。
●不需要灌引水，吸程高達7m，揚程達50m，出口壓力不小于6kgf每平方厘米。
●流動寬蔽，通過性能好，允許通過*顆粒。直徑達10mm抽送泥漿、雜質時，對泵磨損極小。
●揚程、流量可通過氣閥開度實現無級調節。（氣壓調節在2-8kg/平方厘米）
主要優點：
●噪音底
●震動小
●使用壽命長
● 死機
●做工精細
主要應用：
●礦井、坑道、隧道、選礦、礦渣中的積水。泵吸水泥灌漿及灰漿。
●隔膜泵泵吸各種橡膠漿。
●氣動隔膜泵作為各種固液體分離設備的前級送壓裝置。
●塑料氣動隔膜泵可以吸花生醬、泡菜、土豆泥、小紅腸、果醬蘋果漿、巧克力等。
●塑料氣動隔膜泵可以用于吸油漆、樹膠、顏料。
●吸各種污水。
●氣動隔膜泵可以用于為油輪，駁船清倉吸取倉內污水。
●吸啤酒花及發酵粉稀漿、糖漿、糖密。
●粘合劑和膠水、全部種類可用泵吸取。
●氣動隔膜泵可以吸各種磨料、腐蝕劑、石油及泥漿、清洗油垢及一般容器。
●可以吸各種劇毒、易燃、易揮發液體。
●各種強酸、強堿、強腐蝕液體。
●吸各種高溫液體*可耐150度。
●各種瓦、瓷、磚器及陶器釉漿。
●油井鉆好后，用氣動隔膜泵吸沉積物及灌漿。
●吸各種乳劑和填料。
Germany Kaysen imported plastic pneumatic diaphragm pump overview
Pneumatic diaphragm pump is a new type of conveying machinery and a relatively new type of pump in the industry. Using compressed air as the power source, all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids can be exhausted. At present, series production has been formed. There are eight specifications of diameters: φ10mm (3/8''), φ15mm (1/2''), φ25mm (1''), φ40mm (11/2''), φ50mm (2 ''), φ65mm (21/2''), φ80mm (3''), φ100mm (4''). Four materials: aluminum alloy, cast iron, stainless steel, engineering plastics. Diaphragm pumps use nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene diaphragms according to different liquid media. To meet the needs of different users.
main feature:
●The pump has no rotating parts, which will not cause environmental pollution and endanger personal safety.
●It is safe and reliable to use in flammable and explosive places without electricity.
●Can transport viscous liquid. (Viscosity below 10,000 centipoise)
●This pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump. This is a major feature of this pump.
●Pneumatic diaphragm pump can not only pump flowing liquid, but also transport some medium that is not easy to flow. It has many advantages such as self-priming pump, submersible pump, canned pump, mud pump and impurity pump.
● No need to irrigate and draw water, the suction stroke is up to 7m, the lift is up to 50m, and the outlet pressure is not less than 6kgf per square centimeter.
● Wide flow shielding, good passing performance, allowing the largest particles to pass. When pumping mud and impurities with a diameter of up to 10mm, the pump will wear very little.
●The head and flow can be adjusted steplessly through the opening of the air valve. (The air pressure is adjusted to 2-8kg/cm2)
main advantage:
● Noise floor
●Small vibration
●Long service life
● Never crash
● Fine workmanship
main application:
●Water accumulation in mines, tunnels, tunnels, beneficiation and slag. Pumping cement grouting and mortar.
●The diaphragm pump pumps various rubber slurries.
●Pneumatic diaphragm pump is used as the front-stage pressure sending device of various solid-liquid separation equipment.
●Plastic pneumatic diaphragm pump can suck peanut butter, kimchi, mashed potatoes, small red sausage, jam, apple jam, chocolate, etc.
●Plastic pneumatic diaphragm pump can be used to absorb paint, gum and paint.
●Suction all kinds of sewage.
●Pneumatic diaphragm pump can be used to clean the tanker and barge to absorb the sewage in the tank.
●Sucker hops and baking powder slurry, syrup, syrup.
●Adhesive and glue, all types can be sucked by pump.
●Pneumatic diaphragm pump can suck all kinds of abrasives, corrosives, petroleum and mud, clean grease and general containers.
●Can absorb all kinds of highly toxic, flammable and volatile liquids.
●Various strong acids, strong bases, strong corrosive liquids.
● Absorb various high-temperature liquids up to 150 degrees.
●Various tile, porcelain, brick and pottery glaze slurry.
●After the oil well is drilled, use pneumatic diaphragm pump to suck sediment and grouting.
●Suck various emulsions and fillers.
關于Kaysen
我們的基礎
KAYSEN 成功故事的基礎是數十年來的工程專業知識，對應用的深刻理解和不斷創新的高質量產品。因此，該公司集團不斷投資于研發。KAYSEN在 12個生產基地中也具有高度的垂直整合，從而確保為客戶提供*的質量水平，并確保我們不受供應商市場波動的影響。
我們的宗旨
集成在精心設計的解決方案中的模塊化KAYSEN系列，使我們各行各業的客戶可以隨時隨地在其生產過程中實現*的安全性和效率。
對我們而言，與客戶的親近意味著與客戶一起尋找適合個人需求的正確解決方案。個人，實用的建議和流暢的項目處理與我們 客戶服務一樣，都是我們提供的服務的一部分。
我們的承諾
我們熱情地致力于為每個客戶選擇合適的泵，可持續且具有成本效益的解決方案。
在90多個國家/地區，我們自己的銷售，生產和服務公司的大約3,500名員工每天都在努力為每種產品提供快速可靠的服務。由于KAYSEN泵業作為 市場*的地位，意味著對*產品和服務的持續承諾以及對負責任的思維和行動的義務。
Our foundation
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
Our aim
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
Our promise
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.
進口塑料氣動隔膜泵 上海代理商
