天美星辰MV-九一制作天美果冻麻花-天美果冻麻花制作工厂-亚洲中文ac无码在线-凤蝶直播

潛水射流曝氣機-潛水曝氣機-KAYSEN泵業

GERMANY KAYSEN PUMP CO .,LTD

深水自吸式自耦式潛水射流曝氣機是向曝氣池內曝氣的廢水裝置，是廢水活性污泥法生物處理系統曝氣裝置的一種類型。由水泵將泥、水混合液打入射流曝氣器噴嘴，并高速噴出，在射流曝氣器內，氧轉移過程的實現是在這個射流曝氣器噴嘴周圍使壓縮空氣（或空氣直接吸入）與泥水混合液混合并在吼管中強烈攪動，氣泡被粉碎成霧狀，繼而在擴散管中由于速頭變成壓頭，微細氣泡進一步被壓縮，氧即迅速轉移到混合液，從而強化了氧的轉移過程，氧轉移效率可提高到30-35%以上
 

主要特點：

●自重定位，安裝方便，可在不中斷工藝運行的狀態下自由布置
●設計結構緊湊，利用自吸功能無需外接氣源；    
●主機潛水作業減少占地面積，噪音?。?   
●可直接在氧化塘中使用，節省基建成本；    
●獨立移動的曝氣裝置，曝氣時兼有攪拌功能；    
●底盤可根據用戶要求作特殊設計。

主要優點：

●采用潛水電機密封技術的水下電機；   

●葉輪與電機直聯，結構簡單，效率高，壽命長；    

●可加網狀進水口，避免異物進入機體引起不必要的破壞；   

●可通過進氣閥調節進氣量；    

●除電機外，其它部件材質有不銹鋼、碳鋼和鑄鐵供選擇。

主要應用：
潛水射流式曝氣機用于各種污水處理工程中生化處理工藝的曝氣池、曝氣沉砂池、預曝氣池、好氧硝化池曝氣充氧混合及養殖塘增氧。

潛水射流曝氣機選型
建議從五個方面加以考慮，既液體輸送量、揚程、液體性質、管路布置以及操作運轉條件等。
1、流量是選射流曝氣機的重要性能數據之一，它直接關系到整個裝置的的生產能力和輸送能力。如設計工藝能算出離心曝氣機正常、較小、較大三種流量。選擇離心曝氣機時，以理想流量為依據，兼顧正常流量，在沒有理想流量時，通?？扇≌Ａ髁康?.1倍作為理想流量。    
2、揚程是選射流曝氣機的又一重要性能數據，一般要用放大5%—10%余量后揚程來選型。   
3、液體性質，包括液體介質名稱，物理性質，化學性質和其它性質，物理性質有溫度c、密度d、粘度u，介質中固體顆粒直徑和氣體的含量等，這涉及到系統的揚程，有效氣蝕余量計算和合適泵的類型：化學性質，主要指液體介質的化學腐蝕性和毒性，是選用泵材料和選用那一種軸封型式的重要依據。    
4、管路布置條件指的是送液高度送液距離送液走向，吸如側較低液面，排出側較高液面等一些數據和管道規格及其長度、材料、管件規格、數量等，以便進行系梳揚程計算和汽蝕余量的校核。   
 5、操作條件的內容很多，如液體的操作T飽和蒸汽力P、吸入側壓力PS（*）、排出側容器壓力PZ、海拔高度、環境溫度操作是間隙的還是連續的、泵的位置是固定的還是可移的。 

Submersible jet aerator

Submersible aerator

Submersible centrifugal aerator

The deepwater self-priming self-coupled submersible jet aerator is a type of wastewater device that aerates the aeration tank and is a type of aeration device for the biological wastewater treatment system of the wastewater activated sludge process. The mud and water mixture is pumped into the nozzle of the incident aerator by a water pump, and is sprayed at a high speed. In the jet aerator, the oxygen transfer process is realized by directly inhaling compressed air (or air) around the nozzle of the jet aerator. Mixing with the muddy water mixture and vigorously stirring in the manifold, the bubbles are pulverized into a mist, and then in the diffusion tube, the tip becomes a pressure head, the fine bubbles are further compressed, and the oxygen is quickly transferred to the mixture, thereby strengthening Oxygen transfer process, oxygen transfer efficiency can be increased to 30-35% or more

main feature:

● Self-repositioning, easy to install, free to arrange without interrupting the process operation

●The design is compact, and the self-priming function does not require an external air source;

●The host diving operation reduces the floor space and the noise is small;

● It can be used directly in oxidation ponds to save infrastructure costs;

● Independently moving aeration device, which has a stirring function when aeration;

●The chassis can be specially designed according to user requirements.

The main advantage:

●Underwater motor with submersible motor sealing technology;

●The impeller and the motor are directly connected, the structure is simple, the efficiency is high, and the service life is long;

●It can be added with a mesh inlet to prevent foreign matter from entering the body and causing unnecessary damage;

● The intake air amount can be adjusted through the intake valve;

● In addition to the motor, other parts are available in stainless steel, carbon steel and cast iron.

main application:

The submersible jet aerator is used in the aeration tank, aerated grit chamber, pre-aeration tank, aerobic nitrification tank aeration and oxygenation mixing and aquaculture pond oxygenation in various sewage treatment projects.

Submersible jet aerator selection

It is recommended to consider five aspects, such as liquid delivery volume, head, liquid properties, piping layout, and operating conditions.

1. Flow rate is one of the important performance data of the selected jet aerator, which is directly related to the production capacity and conveying capacity of the entire device. For example, the design process can calculate the normal, small and large flow rates of the centrifugal aerator. When a centrifugal aerator is selected, the normal flow rate is based on the ideal flow rate. When there is no ideal flow rate, 1.1 times the normal flow rate can be taken as the ideal flow rate.

2. The lift is another important performance data of the jet aerator. Generally, it should be selected by amplifying the lift by 5%-10%.

3, liquid properties, including liquid media name, physical properties, chemical properties and other properties, physical properties are temperature c, density d, viscosity u, solid particle diameter and gas content in the medium, etc., which involves the lift of the system, effective Calculation of cavitation allowance and type of suitable pump: chemical properties, mainly refers to the chemical corrosiveness and toxicity of the liquid medium, which is an important basis for selecting the pump material and selecting the type of shaft seal.

4. Pipeline layout conditions refer to the liquid feeding height, the liquid feeding distance, the lower liquid level, the higher liquid level on the discharge side, and other data and pipe specifications and their length, materials, pipe fittings specifications, quantity, etc. In order to carry out the calculation of the combing process and the checking of the NPSH.

 5. There are many operating conditions, such as liquid operation T saturated steam force P, suction side pressure PS (absolute), discharge side container pressure PZ, altitude, ambient temperature operation is gap or continuous, pump position is fixed Still removable.

       位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們全面的產品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸的*合作伙伴。

        凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.