天美星辰MV-九一制作天美果冻麻花-天美果冻麻花制作工厂-亚洲中文ac无码在线-凤蝶直播

進口氟塑料化工泵(進口化工泵）

KAYSEN凱森進口氟塑料化工泵概述：
進口氟塑料泵廣泛廣泛適用于：化工、制酸、制堿、冶煉、稀土、農藥、染料、醫藥、造紙、電鍍、酸洗、無線電、化成箔等行業輸送酸、堿、有機溶劑、強氧化劑等腐蝕性介質。 適用溫度：-20°C至120°C。
氟塑料泵是化工泵系列中以制造用材分類的一種泵，氟塑料泵按其結構可以分為以下幾類：一、氟塑料離心泵；二、氟塑料液下泵；三、氟塑料磁力泵；四、氟塑料自吸泵；五、氟塑料管道泵；六氟塑料砂漿泵；七、鋼襯氟塑料泵等。

主要特點：
目前業內生產的內襯氟塑料型耐腐蝕泵（大型泵）如：氟塑料驅動大型磁力泵內襯材、氟塑料離心泵、氟塑料自吸泵及襯氟鋼管等質均為聚全氟代乙丙烯（FEP，簡稱F46）內襯F46泵及具有優良的耐腐蝕性和良好的剛性，并能耐沖擊、耐振動和耐扭曲，已廣泛地應用在石油、化工工業中輸送腐蝕性液體和氣體。
氟塑料泵可在下列條件下使用：溫度-80℃~+160℃，壓力≤16公斤/厘米2，真空范圍（瞬時，常溫）400mmHg柱。在使用過程中，顯出了它特有的性能。應用及效益例舉如下：
（1）使用性能和耐腐蝕性能優于酚醛膠泥、搪瓷制品，襯玻璃制品和不銹鋼等材料。尤其是使用在強氧化劑存在的場合，使用壽命較上述材料可提高一至數倍，特別指出，它們能經受醚類介質的滲透腐蝕。
（2）能經得起各種腐蝕介質的考驗。在已使用過程的介質中，有溴、苯、甲醛、鹽酸、鹽酸鹽、50%硫酸、12%NaSCN、HSCN、異丙醚、22%NaOH、氯苯水，對苯磺酸、99.5%氯氣、95~90%叔丁基次氯酸鹽、0.51%游離氯、11~12%氯丙醇水溶液（PH=2~3）、氯丙醇、氯丙酮BB一二氯異丙醚、二氯丙烷、 苯、次氯酸、CCL4等。
（3）在各種腐蝕性介質同時存在的情況下，即使160℃左右也可使用。例如，666氯化液中含有苯（ ）、次氯酸、鹽酸等各種腐蝕介質，既有強有機溶劑，又有強的氧化性介質，還有強酸等，除F46，F(xiàn)4以外，難找到一種合適的材料能同時耐這些介質交替或同時腐蝕。
目前業內生產的全氟（氟塑料合金）型耐腐蝕泵（小型泵）如：CQB氟塑料驅動小型磁力泵，F(xiàn)SB氟塑料離心泵等及其他泵葉輪等配件所用材質均為中國上海中科院專利材料--氟塑料合金（F4與F46及少量添加劑按一定比例混合加工而成）。
氟塑料合金具有無可比擬的耐腐蝕性和機械強度耐沖擊、耐振動、耐扭曲及無毒素分解。

Germany  Kaysen Fluoroplastic Chemical Pump Overview:

Fluoroplastic pumps are widely used in: chemical, acid, alkali, smelting, rare earth, pesticide, dye, medicine, paper, electroplating, pickling, radio, chemical foil and other industries to transport acid, alkali, organic solvents, strong oxidants, etc. Corrosive medium. Applicable temperature: -20 ° C to 120 ° C.

Fluoroplastic pump is a kind of pump which is classified into manufacturing materials in chemical pump series. Fluoroplastic pump can be divided into the following categories according to its structure: 1. Fluorine plastic centrifugal pump; 2. Fluoroplastic liquid lower pump; 3. Fluorine plastic magnetic force Pump; four, fluorine plastic self-priming pump; five, fluoroplastic pipeline pump; hexafluoroplastic mortar pump; seven, steel-lined fluoroplastic pump.

main feature:

At present, the industry-lined fluoroplastic type corrosion-resistant pump (large pump) such as: fluoroplastic drive large magnetic pump lining material, fluorine plastic centrifugal pump, fluorine plastic self-priming pump and lining fluorine steel pipe are all polyfluorinated Ethylene propylene (FEP, F46 for short) lining F46 pump has excellent corrosion resistance and good rigidity, and can withstand impact, vibration and distortion. It has been widely used in petroleum and chemical industries to transport corrosive liquids and gases. .

The fluoroplastic pump can be used under the following conditions: temperature -80 ° C ~ +160 ° C, pressure ≤ 16 kg / cm 2 , vacuum range (instantaneous, normal temperature) 400 mm Hg column. In the course of its use, it shows its unique performance. Examples of applications and benefits are as follows:

(1) The use performance and corrosion resistance are superior to phenolic cement, enamel products, lining glass products and stainless steel. Especially in the presence of strong oxidizing agents, the service life can be increased by one to several times compared with the above materials, in particular, they can withstand the osmotic corrosion of ether media.

(2) It can withstand the test of various corrosive media. In the medium used, there are bromine, benzene, formaldehyde, hydrochloric acid, hydrochloride, 50% sulfuric acid, 12% NaSCN, HSCN, diisopropyl ether, 22% NaOH, chlorobenzene water, p-benzenesulfonic acid, 99.5%. Chlorine, 95~90% t-butyl hypochlorite, 0.51% free chlorine, 11~12% chloropropanol aqueous solution (pH=2~3), chloropropanol, chloroacetone BB-dichloroisopropyl ether, two Chloropropane, benzene, hypochlorous acid, CCL4, etc.

(3) In the case where various corrosive media are present at the same time, it can be used even at around 160 °C. For example, 666 chlorinated solution contains various corrosive media such as benzene ( ), hypochlorous acid, hydrochloric acid, etc., including strong organic solvents, strong oxidizing media, and strong acid, except F46 and F4. It is difficult to find a suitable material that can withstand alternating or simultaneous corrosion of these media.

At present, the perfluoro (fluoroplastic alloy) type corrosion-resistant pump (small pump) produced in the industry, such as: CQB fluoroplastic drive small magnetic pump, FSB fluoroplastic centrifugal pump, and other pump impellers and other accessories are made of materials. -- Fluoroplastic alloy (F4 and F46 and a small amount of additives are mixed in a certain proportion).

Fluoroplastic alloys have unmatched corrosion resistance and mechanical strength, impact resistance, vibration resistance, distortion resistance and no toxin decomposition.

位于Schw?bischGmünd的凱森Kaysen泵業有限公司是*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。

The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

進口氟塑料化工泵(進口化工泵）